User's Manual


Battery Delay Learn Cycle

Does my controller support this feature? See "Supported Features."
The controller firmware automatically initiates the battery Learn cycle every 90 days. Although you cannot stop the firmware from running the Learn cycle, you
can delay the start time of the Learn cycle for up to seven days. See "Start Learn Cycle" for more information on the battery Learn cycle.
To delay the battery Learn cycle:

1. Type a numerical value in the Days text box. The value must be within the 0 – 7 range. The value you enter indicates the number of days for which you
want to delay the battery Learn cycle. The Learn cycle can be delayed for a maximum of seven days.

2. Type a numerical value in the Hours text box. The value must be within the 0 – 23 range. The value you enter indicates the number of hours for which
you want to delay the battery Learn cycle.

3. Click Apply Changes. If you want to exit and cancel your changes, click Go Back To Battery Information Page.

To locate this task in Storage Management:

1. Expand the Storage tree object to display the controller objects.

2. Expand the controller object.

3. Select the Battery object.

4. Select Delay Learn Cycle from the Available Tasks drop-down menu.

5. Click Execute.

Related Information:
l "Battery Properties and Tasks"
l "Start Learn Cycle"
Back to Contents Page
