User's Manual


Enclosure Support
Table A-58. Enclosure Support on the Non-RAIDControllers
Enclosure and Backplane Features
This section identifies the features supported by the enclosure or backplane.
l "Enclosure and Backplane Tasks"
l "Enclosure and Backplane Support for Smart Thermal Shutdown"
For information on controller-supported features, see:
l "Supported Features on the PERC 3/SC, 3/DC, 3/QC, 4/SC, 4/DC, 4/Di, 4e/Si, 4e/Di, 4e/DC, CERC ATA100/4ch, and 4/IM Controllers"
l "Supported Features on the PERC 3/Si, 3/Di, CERC SATA1.5/2s, and CERC SATA1.5/6ch Controllers"
l "Supported Features on the PERC 5/E, PERC 5/i, PERC 6/E, PERC 6/I, PERC 6/I Modular, and CERC 6/I Controllers"
l "Supported Features on the SAS 5/iR, SAS 6/iR, and PERC H200 Controllers"
l "Supported Features on the PERC S100 and S300 Controllers"

Enclosure and Backplane Tasks
Table A-59.EnclosureTasks
Table A-60.BackplaneTasks
Cancel Check Consistency
No
No
Pause Check Consistency
No
No
Resume Check Consistency
No
No
Cancel Background Initialization (BGI)
No
No
Format Virtual Disk
No
No
Cancel Format Virtual Disk
No
No
Restore Dead Disk Segments
No
No
Initialize Virtual Disk
No
No
Fast Initialize Virtual Disk
No
No
Slow Initialize Virtual Disk
No
No
Cancel Initialize Virtual Disk
No
No

Enclosure Support

Non-RAID SCSI

Non-RAID SAS
Can an enclosure be attached to this controller?
Yes
No

Enclosure and Backplane
Tasks

PowerVault™20xS
and 21xS

PowerVault 220S
and 221S

PowerVault
MD1000 Storage

PowerVault
MD1120



PowerVault
MD1200 Storage

PowerVault
MD1220


Enable Alarm
No
Yes
Yes
Yes
Yes
Yes
Disable Alarm
No
Yes
Yes
Yes
Yes
Yes
Set Temperature Probe Values
Yes
Yes
Yes
Yes
Yes
Yes
Set Asset Data (includes asset
tag and asset name)
Yes
Yes
Yes
Yes
Yes
Yes
Blink Enclosure
No
No
Yes
Yes
Yes
Yes

Enclosure and Backplane Tasks

SCSI

SAS
Enable Alarm
No
No
Disable Alarm
No
No
Set Temperature Probe Values
No
No