User's Manual


Enclosure Support
Table A-52. Enclosure Support on the PERC S100 and S300 Controllers
Supported Features on the Non-RAID Controllers
This section identifies the controller-supported features and whether or not an enclosure can be attached to the controller.
l "Controller Tasks"
l "Battery Tasks"
l "Connector Tasks"
l "Physical Disk Tasks"
l "Virtual Disk Tasks"
l "Enclosure Support"
For enclosure-supported tasks, see "Enclosure and Backplane Features."

Controller Tasks
Table A-53. Controller Tasks Supported on the Non-RAIDControllers

Write Back (Enabled)
Yes
Yes
Write Through (Disabled)
Yes
Yes
Force Write Back (Enabled Always)
No
No
Write Cache Enabled Protected
No
No
Cache Policy
No
No
Disk Cache Policy
No
No
Cache I/O
No
No
Direct I/O
No
No

Enclosure Support

PERC S100

PERC S300
Can an enclosure be attached to this controller?
No
No

Controller Task Name

Non-RAID SCSI

Non-RAID SAS
Enable Alarm
No
No
Disable Alarm
No
No
Quiet Alarm
No
No
Test Alarm
No
No
Reset configuration
No
No
Set Rebuild Rate
No
No
Set Background Initialization Rate
No
No
Set Check Consistency Rate
No
No
Set Reconstruct Rate
No
No
Rescan Controller
No
No
Create Virtual Disk
No
No
Export Log File
No
No
Clear Foreign Configuration
No
No
Import Foreign Configuration
No
No
Import/Recover Foreign Configuration
No
No
Set Patrol Read Mode
No
No
Start Patrol Read
No
No
Stop Patrol Read
No
No