User's Manual
Back to Contents Page
Virtual Disks
Dell™OpenManage™ServerAdministratorStorageManagementUser'sGuide
In order to implement RAID functions, RAID controllers must create a virtual disk. A virtual disk refers to storage created by a RAID controller from one or more
physical disks. Although a virtual disk may be created from several physical disks, it is seen by the operating system as a single disk. Depending on the RAID
level used, the virtual disk may retain redundant data in case of a disk failure or have particular performance attributes. See "Understanding RAID Concepts"
for more information.
Considerations Before Creating Virtual Disks
Different controllers have particular characteristics in the way they implement virtual disks. These characteristics may include use of disk space, limitations on
the number of virtual disks per controller, and so on. It can be helpful to understand these characteristics before creating virtual disks on the controller.
The following sections describe controller information that applies to virtual disks:
l "Virtual Disk Considerations for PERC 3/SC, 3/DC, 3/QC, 4/SC, 4/DC, 4e/DC, 4/Di, 4e/Si, 4e/Di, CERC ATA100/4ch, PERC 5/E, PERC 5/i, PERC 6/E, and
PERC 6/I Controllers"
l "Virtual Disk Considerations for PERC 3/Si, 3/Di, CERC SATA1.5/6ch, and CERC SATA1.5/2s controllers"
l "Problems Associated With Using the Same Physical Disks for Both Redundant and Nonredundant Virtual Disks"
l "Virtual Disk Considerations on Linux"
l "Number of Physical Disks per Virtual Disk"
l "Maximum Number of Virtual Disks per Controller"
l "Calculation for Maximum Virtual Disk Size and the Create Virtual Disk Express Wizard"
You may also want to review the following sections:
l "RAID Controller Read, Write, Cache, and Disk Cache Policy"
l "Understanding Hot Spares"
l "Controller-supported Stripe Sizes"
l "Rescan to Update Storage Configuration Changes"
l "Time Delay in Displaying Configuration Changes"
Virtual Disk Considerations for PERC 3/SC, 3/DC, 3/QC, 4/SC, 4/DC, 4e/DC, 4/Di, 4e/Si,
4e/Di, CERC ATA100/4ch, PERC 5/E, PERC 5/i, PERC 6/E, and PERC 6/I Controllers
In addition to the considerations described in this section, you should also be aware of the controller limitations described in "Number of Physical Disks per
Virtual Disk."
Be aware that the following considerations apply when creating virtual disks:
l Creating virtual disks on PERC 3/SC, 3/DC, 3/QC, 4/SC, 4/DC, 4e/DC, 4/Di, 4e/Si, 4e/Di, CERC ATA100/4ch, PERC 5/E, PERC 5/i, PERC 6/E, and PERC 6/I
controllers. When you create a virtual disk, you specify which physical disks are to be included in the virtual disk. The virtual disk you create spans the
Considerations Before Creating Virtual Disks
Span Edit
Creating Virtual Disks
Virtual Disk Task: Reconfigure (Step 1 of 3)
Reconfiguring/Migrating Virtual Disks
Virtual Disk Task: Reconfigure (Step 2 of 3)
Starting and Target RAID Levels for Virtual Disk Reconfiguration and Capacity Expansion
Virtual Disk Task: Reconfigure (Step 3 of 3)
Maintain Integrity of Redundant Virtual Disks
Format and Initialize; Slow and Fast Initialize
Rebuilding Redundant Information
Virtual Disk Task: Delete
Virtual Disk Bad Block Management
Virtual Disk Task: Rename
Virtual Disk Properties and Tasks
Virtual Disk Task: Change Policy
Create Virtual Disk Express Wizard (Step 1 of 2)
Split Mirror
Create Virtual Disk Express Wizard (Step 2 of 2)
Unmirror
Create Virtual Disk Advanced Wizard (Step 1 of 4)
Assign and Unassign Dedicated Hot Spare
Create Virtual Disk Advanced Wizard (Step 2 of 4)
Virtual Disk Task: Replace Member Disk (Step 1 of 2)
Create Virtual Disk Advanced Wizard (Step 3 of 4)
Virtual Disk Task: Replace Member Disk (Step 2 of 2)
Create Virtual Disk Advanced Wizard (Step 4 of 4)
NOTE: Virtual disks can only be created on a RAID controller.
NOTE: In addition to this document, review the hardware documentation that is provided with the controllers. Reviewing the hardware documentation
along with this document may provide a better understanding of the controller limitations.