SNMP Reference Guide

344 Device Group
Table 13-28. SD Card Device Config Settings
Table 13-29. SD Card Device Card State
Variable Name: DellSDCardDeviceConfigSettings
Data Type: Integer
NOTE:
These values are bit fields, so combination values are possible.
Possible Data Values Meaning of Data Value
none(0) SD card device has none of the following
settings.
sdEnabled(1) SD media is enabled.
vFlashEnabled(2) Virtual Flash (vFlash) is enabled.
Variable Name: DellSDCardDeviceCardState
Data Type: Integer
NOTE:
These values are bit fields, so combination values are possible.
Possible Data Values Meaning of Data Value
none(0) SD card state is none of the following states.
present(1) Device is present.
ipmiReady(2) Device is IPMI ready.
fullReady(4) Device is full ready.
offline(8) Device is offline.
failed(16) Device is failed.
active(32) Device is active.
bootable(64) Device is bootable.
writeProtect(128) Device is write-protected.
standby(256) Device is in standby mode.