Users Guide
Table Of Contents
- User’s Guide
- Introduction
- What’s New for Version 6.1
- Setup and Administration
- Using Server Administrator
- Server Administrator Services
- Working With Remote Access Controller
- Overview
- Viewing Basic Information
- Configuring the Remote Access Device to use a LAN Connection
- Configuring the Remote Access Device to use a Serial Port Connection
- Configuring the Remote Access Device to use a Serial Over LAN Connection
- Additional Configuration for iDRAC
- Configuring Remote Access Device Users
- Setting Platform Event Filter Alerts
- Server Administrator Logs
- Setting Alert Actions
- Troubleshooting
- Frequently Asked Questions
- Glossary
- Index
106 Setting Alert Actions
Understanding Service Names
The service executable and display names of the following services have
changed:
Power Supply/VRM/D2D
Failure
The power supply, voltage regulator module, or DC to
DC converter has failed.
Hardware log is full or
emptied
Either an empty or a full hardware log requires
administrator attention.
Automatic System
Recovery
The system is hung or is not responding and is taking an
action configured by Automatic System Recovery.
System Power Probe
Warning
The power consumption is approaching the failure
threshold.
System Power Probe
Failure
The power consumption has crossed the highest
acceptable limit and has resulted in a failure.
Table 8-2. Service Names
Purpose Service Name Previous Release
(prior to 5.0)
Current Release
Web Server Display Name Secure Port
Server
DSM SA Connection
Service
Executable Name Omaws[32|64] dsm_om_connsvc[32|64]
dsm_om_connsvc
Scheduling
or Notification
Display Name OM Common
Services
DSM SA Shared Services
Executable Name Omsad[32|64] dsm_om_shrsvc[32|64]
dsm_om_shrsvc
Table 8-1. PEF Alert Events (continued)
Event Description
book.book Page 106 Monday, June 22, 2009 11:05 AM