User's Manual

omconfig: Managing Components Using the Instrumentation Service 99
attribute=uausb setting=on | backonly
| off
on: Enables the user-accessible
USB port(s)
backonly: Enables only the user
accessible USB port(s) located at the
back of the system.
off: Disables the user-accessible
USB port(s).
attribute=usb setting=enabled |
disabled
enabled: Enables the USB port(s).
disabled: Disables the USB port(s).
NOTE: Depending on your system’s
hardware, only one of the two attributes
usb and usbb is available for configuring
the USB port(s).
attribute=usbb setting=enabled |
enabledwithbios|
disabled
enabled: Enables the USB port(s) during
system boot, without BIOS support.
enabledwithbios: Enables the USB
port(s) during the system boot, with
BIOS support.
disabled: Disables the USB port(s)
during system boot.
NOTE: Depending on your system’s
hardware, only one of the two attributes
usb and usbb is available for configuring
the USB port(s).
Table 4-3. BIOS Setup Settings (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description