User's Manual

omconfig: Managing Components Using the Instrumentation Service 97
attribute=rombb setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel B as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=sata setting=off | ata | raid off: Disables the SATA controller.
ata: Sets the onboard SATA controller to
ATA mode.
raid: Sets the onboard SATA controller
to RAID mode.
attribute=sataport
(0...7) or (A...H)
setting=off | auto off: Disables the SATA port.
auto: Automatically enable the
SATA port.
attribute=
secondaryscsi
setting=on | off on: Enables this device.
off: Disables this device.
attribute=
serialportaddr
setting=default |
alternate
default: Maps to Serial device1=COM1,
Serial device2=COM2.
alternate: Maps to Serial device1=
COM2, Serial device2=COM1
attribute=
serialcom
setting=off | on
|com1 |com2
off: Disables serial communication
setting.
on: Enables serial communication
setting without console redirection.
com1: Enables serial communication
setting with console redirection via
COM 1.
com2: Enables serial communication
setting with console redirection via
COM 2.
Table 4-3. BIOS Setup Settings (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description