User's Manual

92 omconfig: Managing Components Using the Instrumentation Service
attribute=
embvideoctrl
setting=enabled |
disabled
enabled: Enables the embedded video
controller to be the primary video
device.
disabled: Disables the embedded video
controller to be the primary video
device.
attribute=
extserial
setting=com1 | com2
| rad
com1: Maps external serial connector to
COM 1.
com2: Maps external serial connector to
COM 2.
rad: Maps external serial connector to
remote access device.
attribute=fbr setting=9600 | 19200
| 57600 | 115200
9600: Sets the console redirection failsafe
baud rate to 9600 bits per second.
19200: Sets the console redirection failsafe
baud rate to 19200 bits per second.
57600: Sets the console redirection
failsafe baud rate to 57600 bits per
second.
115200: Sets the console redirection
failsafe baud rate to 115200 bits per
second.
attribute=ide setting=on | off
force=true
on: Enables this device.
off: Disables this device.
force=true: Verification of setting
change.
attribute=
idepridrv
setting=off | auto off: Disables the device.
auto: Detects and enables the device
automatically.
Table 4-3. BIOS Setup Settings (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description