User's Manual

omconfig: Managing Components Using the Instrumentation Service 87

omconfig chassis/omconfig mainsystem

Use the omconfig chassis or omconfig mainsystem commands to default or

to set values for fan, voltage, and temperature probes, to configure BIOS

behavior during system start up, to clear memory error counts, and to enable

or disable power button control features where system configuration permits.

Use the omconfig chassis -? or omconfig mainsystem -? command to view a

list of all omconfig chassis/omconfig mainsystem commands.

omconfig chassis biossetup/omconfig mainsystem biossetup

Use the omconfig chassis biossetup or omconfig mainsystem biossetup

command to configure system BIOS settings that are normally available only

in your system's BIOS setup boot time settings.

CAUTION: Changing certain BIOS setup options might disable your system or

require you to reinstall the operating system.

NOTE: Reboot your system for the BIOS setup options take effect.

NOTE: Not all BIOS setup options are available on every system.

NOTE: Due to the limitations of certain operating systems (for example, VMware

ESXi), certain features may not be available with this release of OpenManage

Server Administrator.

OpenManage Tools 6.x.x

Remote Access Controller 4 Data Populator

4.x.x

Remote Access Controller 4 Managed Node

4.6.3

Secure Port Server 1.

Server Administrator Framework 6.

Agent for Remote Access 1.x.x

Storage Management 3.x.x

Sun Java Runtime Environment 1.x.xx