User's Manual

omconfig: Managing Components Using the Instrumentation Service 83
fancontrol P, A Allows you to
optimize fan speed
for maximum
cooling or quiet
operation.
frontpanel A Configures the
Power button and
Nonmasking
Interrupt (NMI)
button if present on
the system.
info P, A Allows you to set an
initial value, or to
edit the value for,
asset tag or chassis
name.
leds P, A Specifies when to
flash a chassis fault
LED or chassis
identification LED,
and allows you to
clear the LED for
the system's hard
drive.
memorymode A Enables or disables
the spare bank and
mirroring memory
modes, and also
specify which mode
to use.
Table 4-2. omconfig Command Level 1, Level 2, and Level 3 (continued)
Command Level 1 Command Level 2 Command Level 3 User
Privilege
Required
Use