User's Manual

82 omconfig: Managing Components Using the Instrumentation Service
thrmshutdown A Sets the severity
level at which a
thermal event
triggers a system
shutdown.
webserver A Starts or stops the
Web server.
chassis/
mainsystem
biossetup A Configures the
behavior of specific
system components
controlled by the
BIOS.
bmc A Configures remote
access information.
NOTE: This
command is phased-
out in this release. It
is replaced by the
remoteaccess
command.
fans P, A Configures fan
probe warning
thresholds by
default or by value.
NOTE: You cannot
change threshold
values on embedded
server management
(ESM3) and Dell™
PowerEdge™ x8xx
systems.
Table 4-2. omconfig Command Level 1, Level 2, and Level 3 (continued)
Command Level 1 Command Level 2 Command Level 3 User
Privilege
Required
Use