User's Manual

68 omreport: Viewing System Status Using the Instrumentation Service
omreport system platformevents/omreport servermodule platformevents
Use the omreport system platformevents or omreport servermodule
platformevents command to view how the system responds for each listed
platform event.
omreport system recovery/omreport servermodule recovery
Use the omreport system recovery or omreport servermodule recovery
command to see whether there is an action configured for a hung operating
system. You can also view the number of seconds that must elapse before an
operating system is considered hung.
omreport system shutdown/omreport servermodule shutdown
Use the omreport system shutdown or omreport servermodule shutdown
command to view any pending shutdown actions for your system.
If properties for shutdown are configured, executing this command displays
these properties.
NOTE: Due to the limitations of certain operating systems (for example, VMware
®
ESXi), certain features may not be available with this release of OpenManage
Server Administrator.
omreport system summary/omreport servermodule summary
Use the omreport system summary or omreport servermodule summary
command to view a comprehensive summary of software and hardware
components currently installed on your system.
Destination
Configuration
Settings
attribute=
communitystring
communitystring: Displays the text
string that acts as a password and is
used to authenticate SNMP messages
sent between the BMC and the
destination management station.
Table 3-8. Settings for the omreport system pedestinations/omreport servermodule
pedestinations (continued)
Output Attributes Description