User's Manual

66 omreport: Viewing System Status Using the Instrumentation Service
Example Command for an Event Type
Type:
omreport system events type=fans
or
omreport servermodule events type=fans
The following is an example output:
-----------
Fans
-----------
Settings
Enable: Critical
Disable: Informational and Warning
omreport system operatingsystem/omreport servermodule
operatingsystem
Use the omreport system operatingsystem or omreport servermodule
operatingsystem command to display information about your operating
system.
omreport system pedestinations/omreport servermodule pedestinations
Use the omreport system pedestinations or omreport servermodule
pedestinations command to view destinations where alerts for platform
events are configured to be sent. Depending on the number of destinations
displayed, you can configure a separate IP address for each destination
address.
type=systempower Reports events for system power.
type=temps Reports events for temperatures.
type=volts Reports events for voltages.
Table 3-7. System Events by Component Type (continued)
name=value pair Description