User's Manual

omreport: Viewing System Status Using the Instrumentation Service 49
If your system supports redundant memory, the redundancy output may
resemble the following:
omreport chassis nics/omreport mainsystem nics
Use the omreport chassis nics or omreport mainsystem nics command to
view NIC properties. Type:
omreport chassis nics index=
n
or
omreport mainsystem nics index=
n
The index parameter is optional. If you do not specify the index, Server
Administrator displays properties about all NICS on your system. If you
specify the index, Server Administrator displays properties for a specific NIC.
Values display for the following fields: Index (number of the NIC card),
IP Address, Vendor, Description, and Connection Status.
omreport chassis ports/omreport mainsystem ports
Use the omreport chassis ports or omreport mainsystem ports command to
view properties of your system’s parallel and serial ports.
Values display for the following fields: Port Type, External Name,
Base I/O Address, IRQ Level, Connector Type, and Maximum Speed.
Memory Redundancy
Redundancy Status
Fail Over State
Redundancy Configuration
Attributes
Memory Array 1
Attributes
Memory Array 1
Attributes
Memory Array 1
Attributes
Memory Array 1
Attributes
Memory Array 1
: Full
: Inactive
: SpareBank
: Location
: Proprietary Add-on Card
: Use
: Unknown
: Installed Capacity
: 1536 MB
: Maximum Capacity
: 12288 MB
: Slots Available
: 12