User's Manual

omreport: Viewing System Status Using the Instrumentation Service 41
Processor CMP Displays the number of cores enabled per processor.
User accessible USB
Ports
Displays whether the user-accessible USB port is enabled or
disabled.
CPU Virtualization
Technology
Displays the additional hardware capabilities provided by
Virtualization Technology.
AC Power Recovery
Mode
Displays the system state when input power is restored after
an outage.
Embedded SATA
Controller
Displays whether the embedded SATA controller is set to
ATA mode, RAID mode, or is disabled.
SATA port 0 Displays the state of SATA port 0.
SATA Port 1 Displays the state of SATA port 1.
Dual NIC (1/2) Displays whether NIC 1 and NIC 2 with PXE/iSCSI is
enabled or disabled.
Dual NIC (3/4) Displays whether NIC 3and NIC 4 with PXE/iSCSI is
enabled or disabled.
NIC 1 Displays whether the first NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 2 Displays whether the second NIC is enabled (with or
without PXE/iSCSI) or disabled during system boot.
NIC 3 Displays whether the third NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 4 Displays whether the fourth NIC is enabled (with or
without PXE/iSCSI) or disabled during system boot.
Trusted Platform
Module (TPM)
Security
Displays whether Trusted Platform Module is off, on with
pre-boot measurements, or on without pre-boot
measurements.
Internal USB Displays whether internal USB is enabled or disabled.
Operating System
Watchdog Timer
Displays whether the operating system watchdog timer is
enabled or disabled.
Internal SD Card Displays whether the internal SD card is enabled or
disabled.
Table 3-3. BIOS Setup Parameters (continued)
Parameters Description