User's Manual

226 Using the Storage Management Service
Complete Syntax
action=cancelreplacemember controller=id pdisk=
<PDISKID>
where
id is the physical disk IDs as reported by the omreport command.
Example Syntax
To cancel replace member operation on disk 0:0:1 which is connected to
controller 0, enter:
omconfig storage pdisk action=cancelreplacemember
controller=0 pdisk=0:0:1
omconfig Battery Commands
The following sections provide the omconfig command syntax required to
execute battery tasks.
omconfig Recondition Battery
Use the following omconfig command to recondition a controller battery. See
the Dell OpenManage Online Help for more information on batteries and the
recondition process.
Complete Syntax
omconfig storage battery action=recondition
controller=id battery=id
Table 6-24. omconfig Battery Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage battery
action=recondition controller=id battery=id
action=startlearn controller=id battery=id
action=delaylearn controller=id battery=id
days=d hours=h