User's Manual

196 Using the Storage Management Service
Complete Syntax
omconfig storage controller action=
importrecoverforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller
command.
NOTE: This command is supported only in firmware version 5.1.1.
Example Syntax
To import and recover foreign configurations on controller 1, enter:
omconfig storage controller action=
importrecoverforeignconfig controller=1
omconfig Clear Foreign Configuration
Use the following omconfig command syntax to clear or delete all virtual
disks that reside on physical disks newly attached to the controller.
Complete Syntax
omconfig storage controller action=
clearforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To clear foreign configurations on controller 1, enter:
omconfig storage controller action=
clearforeignconfig controller=1
omconfig Set Patrol Read Mode
Use the following omconfig command syntax to set the patrol read mode for
the controller.