User's Manual

178 Using the Storage Management Service
omreport Virtual Disk Status
Table 6-14 describes the syntax for the omreport Virtual Disk Commands
omconfig Global Commands
The following sections provide the omconfig command syntax required to
execute the global commands. When executed, these commands apply to all
controllers. These global commands also correspond to the global tasks
provided by the Storage tree view object’s Information/Configuration
subtab.
Table 6-14. omreport Virtual Disk Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage vdisk Displays property information
for all virtual disks on all
controllers.
controller=id
where id is the controller
number. For example:
controller=0.
Displays all virtual disks on
the specified controller.
controller=id vdisk=id
where id is the controller
number and the virtual disk
number. For example:
controller=0 vdisk=1.
Displays the specified virtual
disk on the controller.
Table 6-15. omconfig Global Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage globalinfo
action=enablests
action=disablests
action=globalrescan
action=setprotectionpolicies type=ghs or dhs