User's Manual

170 Using the Storage Management Service
omreport Controller Status
Table 6-4 describes the syntax for the omreport Controller Commands.
omreport Global Information (Smart Thermal Shutdown Status, Hot
Spare Protection Policy)
Table 6-5 describes the syntax for the omreport Global Information
Commands.
Table 6-4. omreport Controller Commands
Required Command
Levels (1, 2, 3)
Optional name=
value pairs
Use
omreport storage
controller
Displays property information for all controllers
attached to the system.
controller=id
where id is the
controller
number. For
example:
controller=0
Displays the specified controller and all
attached components such as enclosures, virtual
disks, physical disks, and so on.
Table 6-5. omreport Global Information Commands
Required Command Levels
(1, 2, 3)
Optional name=
value pairs
Use
omreport storage
globalinfo
Displays whether smart thermal shutdown
is enabled or disabled. See the "omconfig
Global Enable Smart Thermal
Shutdown" command for more
information.
Displays the hot spare protection policy
that you have set.
See the Dell
OpenManage Server Administrator
Storage Management User’s Guide for
more information on setting hot spare
protection policy.