User's Manual

138 omconfig: Managing Components Using the Instrumentation Service
event=powerwarn Sets action or enables/disables alert generation when a power
device probe detects that the power supply, voltage regulator
module, or DC to DC converter is pending a failure
condition.
event=powerabsent Sets action or enables/disables alert generation when a
processor probe detects that the power supply is absent.
event=powerfail Sets action or enables/disables alert generation when a power
device probe detects that the power supply, voltage regulator
module, or DC to DC converter has failed.
event=processorwarn Sets action or enables/disables alert generation when a
processor probe detects that the processor is running at less
than peak performance or speed.
event=processorfail Sets action or enables/disables alert generation when a
processor probe detects that the processor has failed.
event=
processorabsent
Sets action or enables/disables alert generation when a
processor probe detects that the processor is absent.
event=redundegrad Sets action or enables/disables alert generation when the
system’s fans and/or power supplies become inoperative,
resulting in less than full redundancy for that component.
event=redunlost Sets action or enables/disables alert generation when the
system’s fans and/or power supplies become inoperative,
resulting in a lost or a "no redundant components working"
condition for that component.
event=
systempowerwarn
Sets actions when a power consumption probe detects a
warning value.
event=
systempowerfail
Sets actions when a power consumption probe detects a
failure value.
event=tempwarn Sets action or enables/disables alert generation when a
temperature probe detects that the temperature is
approaching the maximum high or low limits.
event=tempfail Sets action or enables/disables alert generation when a
temperature probe detects that the temperature is either too
high or low for proper operation.
Table 4-26. omconfig system platformevents (continued)
Event Name Description