User's Manual

omconfig: Managing Components Using the Instrumentation Service 129
Table 4-20 shows the valid parameters for the command.
omconfig preferences webserver
Use the omconfig preferences webserver command to set the encryption
levels of the Server Administrator Web server and configure the URL launch
point in the Server Administrator Web server environment.
Table 4-21 shows the name=value pairs you can use with this command.
Table 4-21. Configuring Webserver Preferences
For example, to set the URL launch point use the following command:
omconfig preferences webserver attribute=seturl
host=<name, ip, fqdn> port=<number>
Table 4-20. Enabling User Access for Administrators, Power Users, and Users
Command Result Description
omconfig preferences useraccess
enable=user
Grants Server
Administrator access
to Users, Power Users,
and Administrators.
Least restrictive form
of user access.
omconfig preferences useraccess
enable=poweruser
Grants Server
Administrator access
to Power Users and
Administrators.
Excludes user level
access only.
omconfig preferences useraccess
enable=admin
Grants Server
Administrator access
to Administrators only.
Most restrictive form
of user access.
name=value pair 1 name=value pair 2 Description
attribute=
sslencryption
setting=
<autonegotiate |
128bitorhigher>
autonegotiate: Sets the encryption
levels automatically based on your web
browser settings.
128bitorhigher: Sets the encryption
levels to 128-bit or higher.
attribute=seturl host=<string> port=
<value>
Enables you to
configure the URL
launch point in the Server
Administrator Web server
environment
.