SNMP Reference Guide

22 Introduction
by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group number>,
where <MIB group number> is the MIB group number assigned to the
MIB group. See the relevant section for more information about the
MIB objects defined in a MIB group.
Table 1-2. Server Administrator Instrumentation MIB Sections
in This Guide
Section Topics MIB Group
Numbers
2 Instrumentation MIB Version Group — defines version
numbers of the Instrumentation MIB
1
3 Systems Management Software Group — defines information
about the systems management software and the supported
systems management standards
100
4 System State Group — defines status, state, and redundancy for
a system and its components
200
5 Chassis Information Group — defines chassis types, events, and
indicators
300
6 Operating System Group — defines variables for name, version,
service pack, and other information about a system’s operating
system
400
7 System Resource Group — defines variables for input/output
ports, memory, interrupts, and direct memory access
500
8 Power Group — defines variables for power units, power
supplies, and their current and voltage probes
600
9 Thermal Group — defines variables for temperature probes and
cooling devices
700
10 User Security Group — defines variables for creating and
modifying user accounts
800
11 Remote Flash BIOS Group — defines variables for updating the
system’s BIOS remotely
900
12 Port Group — defines variables for major port types such as
keyboard, monitor, small computer system interface (SCSI),
Universal Serial Bus (USB), and parallel and serial ports
1000