SNMP Reference Guide

Introduction 21
Server Administrator Instrumentation MIB
The Server Administrator Instrumentation MIB (filename 10892.mib) provides
instrumentation data that allows you to monitor the health of a system with
SNMP management applications. It provides:
• Information about the status of temperatures, power supplies, voltages,
currents, fans, and memory at key points in the system
• Rapid access to detailed fault and performance information gathered by
industry standard systems management agents
• Version information for Basic Input/Output System (BIOS), firmware,
and operating system
• A detailed account of every cost of ownership (COO) detail about your system
In addition, traps are sent to report a change in status of the health of critical
components.
The Server Administrator Instrumentation MIB structures its MIB objects
into groups of scalar objects or MIB tables that provide related information.
Table 1-2 describes each Server Administrator Instrumentation MIB group
and lists the MIB group number assigned to the MIB group.
The Server Administrator Instrumentation MIB groups are identified
Table 1-1. General Content Sections in This Guide
Section Topics MIB Group
Number
1 Introduction to SNMP basics and to the MIBs that
support Server Administrator services
NA
26 Traps — describes in-band traps defined in the Server
Administrator Instrumentation MIB and out-of-band
traps sent by the Remote Access Controller (RAC)
and Baseboard Management Controller (BMC).
5000
Appendix A Standard Data Type Definitions — defines standard
data types used in this reference guide.
NA
Appendix B SNMP Sample Output — provides a sample SNMP
output.
NA
Glossary Defines acronyms, abbreviations, and technical terms
used in this reference guide.
NA