Read me

file:///T|/htdocs/SOFTWARE/svradmin/6.1/en/README/readme.txt[10/19/2012 2:06:29 PM]
* RAC firmware 2.0 and higher does not support passwords with special
characters (non-alphanumeric) only for RAC user IDs logging in
using the Web-based interface (with Local RAC Authentication). If
you created RAC user IDs using previous versions of the firmware or
if you created user IDs using Server Administrator that is running
version 2.0 firmware on the managed system, you cannot log in to
the RAC.
Use one of these methods to correct this issue:
- Change your passwords before updating the firmware.
OR
- Use the following CLI command to change the password:
"omconfig rac users username=xx userpassword=yy"
where "xx" is the original userid and "yy" is the new password.
OR
- Change the password through Server Administrator using the "User"
tab. Ensure that the check box to change the password is checked.
Enter a new password, and then enter it again to validate the
change.
OR
- Use the racadm utility to change the password:
"racadm config -g cfgUserAdmin -o cfgUserAdminPassword
-i <usr_index> <new_pwd>"
where <usr_index> is the index of the user database entry to be
modified and <new_pwd> is the new password.
* Depending on your network and proxy configurations and whether you
are using Mozilla browser, you may need to
enter the exact IP address of the RAC controller you are trying to
access in the "No Proxy for" field of your browser.
Perform the following steps:
1. Open your Mozilla browser.
2. Click "Edit".
3. Click "Preferences".
4. Click "Advanced" in the left sidebar.
5. Click "Proxies" in the left sidebar.