Messages Reference Guide

248 Index
The controller battery Learn
cycle will start in %
days., 147
The controller battery needs to
be replaced., 141
The controller battery
temperature is above
normal, 142
The controller battery
temperature is above
normal., 158
The controller battery
temperature is normal., 143
The controller cache has been
discarded., 149
The controller debug log file has
been exported., 166
The controller has recovered
cached data from the
BBU., 212
The controller is unable to
recover cached data from the
battery backup unit
(BBU)., 212
The controller reconstruct rate
has changed., 176
The controller write policy has
been changed to Write
Back., 150
The controller write policy has
been changed to Write
Through., 150
The current kernel version and
the non-RAID SCSI driver
version are older than the
minimum required levels.See
the Readme file for a list of
validated kernel and driver
versions., 140
The DC power supply is
switched off., 203
The dedicated hot spare is too
small., 181
The EMM has failed., 188
The enclosure cannot support
both SAS and SATA physical
disks. Physical disks may be
disabled., 193
The enclosure has a hardware
error., 192
The enclosure is not
responding., 192
The enclosure is unstable., 191
The enclosure temperature has
returned to normal., 218
The factory default settings have
been restored., 213
The firmware on the EMMs is
not the same version. EMM0
%1 EMM1 %2, 198
The global hot spare is too
small., 181