Messages Reference Guide

240 Index
AC power cord sensor, 10
AC power cord sensor has
failed, 45, 67
AC power has been lost, 46
AC power has been restored, 45
All virtual disks are missing from
the controller. This situation
was discovered during
system start-up., 222
An attempt to hot plug an EMM
has been detected. This type
of hot plug is not
supported., 193
An EMM has been
discovered., 187
An EMM has been inserted., 189
An EMM has been removed., 189
An enclosure blink has
ceased, 172
An enclosure blink operation has
initiated., 172
An invalid SAS configuration has
been detected., 147
Array Manager is installed on the
system, 127
Asset name changed, 134
Asset tag changed, 134
Automatic System Recovery
(ASR) action was
performed, 20
B
Background initialization
cancelled, 125
Background initialization
completed, 125
Background initialization
failed, 125
Background initialization
started, 125
Bad block extended medium
error, 133
Bad block extended sense
error, 133
Bad block medium error, 133
Bad block replacement error, 132
Bad block sense error, 132
Bad block table is 80% full., 195
Bad block table is full. Unable to
log block %1, 196
Bad PHY %1, 190
Battery charge in progress, 159
Battery charge process
interrupted, 159
battery messages, 76
BIOS Generated System
Events, 69
bios generated system
messages, 69
BMC Watchdog Events, 64
BMC watchdog messages, 64