Messages Reference Guide

16 Introduction
Device location:
<
Location in
chassis
>
Specifies the location of the device in the specified
chassis, for example:
Device location: Memory Card A
Discrete current
state:
<State>
Specifies the state of the current sensor, for example:
Discrete current state: Good
Discrete
temperature state:
<State>
Specifies the state of the temperature sensor,
for example:
Discrete temperature state: Good
Discrete voltage
state:
<State>
Specifies the state of the voltage sensor, for example:
Discrete voltage state: Good
Fan sensor value:
<Reading>
Specifies the fan speed in revolutions per minute (RPM)
or On/Off, for example:
Fan sensor value (in RPM): 2600
Fan sensor value: Off
Log type:
<Log
type>
Specifies the type of hardware log, for example:
Log type: ESM
Memory device bank
location:
<Bank
name in chassis>
Specifies the name of the memory bank in the system
that generated the message, for example:
Memory device bank location: Bank_1
Memory device
location:
<Device name in
chassis>
Specifies the location of the memory module in the
chassis, for example:
Memory device location: DIMM_A
Number of devices
required for full
redundancy:
<Number>
Specifies the number of power supply or cooling devices
required to achieve full redundancy, for example:
Number of devices required for full
redundancy: 4
Peak value (in
Watts): <Reading>
Specifies the peak value in Watts, for example:
Peak value (in Watts): 1.693
Table 1-2. Event Description Reference (continued)
Description Line Item Explanation