Messages Reference Guide

Storage Management Message Reference 151
2190 The
controller
has detected
a hot-
plugged
enclosure.
OK / Normal /
Informational
Cause: The SAS
controller with firware
version 6.1 or later has
detected a hot-plugged
enclosure. This alert is
for informational
purposes.
Action: None
Clear Alert
Number:
None.
Related Alert
Number:
None.
LRA Number:
None.
751
2191 Multiple
enclosures
are attached
to the
controller.
This is an
unsupported
configuration.
Critical /
Failure / Error
Cause: There are too
many enclosures are
attached to the
controller port. When
the enclosure limit is
exceeded, the controller
loses contact with all
enclosures attached to
the port.
Action: Remove the last
enclosure. You must
remove the enclosure
that has been added last
and is causing the
enclosure limit to
exceed.
Clear Alert
Number:
None.
Related Alert
Number: 2211
LRA Number:
2091
854
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert
Information
SNMP
Trap
Numbers