Users Guide
Complete Syntax
omconfig storage vdisk action=fastinit controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these values, you would enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to fast initialize virtual disk 4 on controller 1, you would enter:
omconfig storage vdisk action=fastinit controller=1 vdisk=4
omconfig Slow Initialize Virtual Disk
Does my controller support this feature? See "Supported Features."
Use the following omconfig command syntax to slow initialize a virtual disk. See "Format and Initialize; Slow and Fast Initialize" for more information.
Complete Syntax
omconfig storage vdisk action=slowinit controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these values, you would enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to slow initialize virtual disk 4 on controller 1, you would enter:
omconfig storage vdisk action=slowinit controller=1 vdisk=4
omconfig Cancel Initialize Virtual Disk
Does my controller support this feature? See "Supported Features."
Use the following omconfig command syntax to cancel the initialization of a virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelinitialize controller=id vdisk=id