Users Guide

omconfig storage controller action= setcheckconsistency controller=1 rate=50

omconfig Export the Controller Log

Does my controller support this feature? See "Supported Features."

Use the following omconfig command syntax to export the controller log to a text file. For more information about the exported log file, see "Export Log."

Complete Syntax

omconfig storage controller action=exportlog controller=id

where id is the controller ID as reported by the omreport storage controller command.

Example Syntax

For example, to export the log on controller 1, you would enter:

omconfig storage controller action=exportlog controller=1

On a Microsoft®Windows®system, the log file is exported to the windows or winnt directory. On a Linux system, the log file is exported to the /var/log
directory.

Depending on the controller, the log file name will be either afa_<mmdd>.log or lsi_<mmdd>.log where <mmdd> is the month and date. For more information
on the controller log file, see "Export Log."


omconfig Import Foreign Configuration

Does my controller support this feature? See "Supported Features."

Use the following omconfig command syntax to import all virtual disks that reside on physical disks newly attached to the controller. See "Foreign Configuration
Operations" for more information.

Complete Syntax

omconfig storage controller action= importforeignconfig controller=id

where id is the controller ID as reported by the omreport storage controller command.

Example Syntax

For example, to import foreign configurations on controller 1, you would enter:
NOTE: The Export Log File command is not supported on the PERC 4/IM, CERC ATA100/4ch, and CERC SATA1.5/2s controllers.