Users Guide

Shutdown" for more information.

Use the following omconfig command syntax to enable smart thermal shutdown.

Complete Syntax

omconfig storage globalinfo action=enablests

Example Syntax

The omconfig command syntax for enabling thermal shutdown does not require that you specify a controller or enclosure ID. To enable thermal shutdown,
enter the following:

omconfig storage globalinfo action=enablests


omconfig Global Disable Smart Thermal Shutdown

Does my controller support this feature? See "Supported Features."

If you have previously enabled smart thermal shutdown using the omconfig command, you can disable smart thermal shutdown and return the system to its
default setting. When smart thermal shutdown is disabled, the operating system and the server will shut down when the PowerVault 220S and PowerVault
221S enclosures reach a critical temperature of 0 or 50 degrees Celsius.

Use the following omconfig command syntax to disable smart thermal shutdown. This command will disable smart thermal shutdown for all controllers.

Complete Syntax

omconfig storage globalinfo action=disablests

Example Syntax

The omconfig command syntax for disabling thermal shutdown does not require that you specify a controller or enclosure ID. To disable thermal shutdown,
enter the following:

omconfig storage globalinfo action=disablests


omconfig Global Rescan

Does my controller support this feature? See "Supported Features."

NOTE: You can use the omreport storage globalinfo command to determine whether smart thermal shutdown is currently enabled or disabled. The
status of smart thermal shutdown is also displayed by the Server Administrator graphical user interface. To locate this status, select the Storage object
and the Information/Configuration tab. See "Storage Information and Global Tasks" for more information.
NOTE: You can use the omreport storage globalinfo command to determine whether smart thermal shutdown is currently enabled or disabled. The
status of smart thermal shutdown is also displayed by the Server Administrator graphical user interface. To locate this status, select the Storage object
and the Information/Configuration tab. See "Storage Information and Global Tasks" for more information.