Users Guide
Battery Tasks
Table A-29.BatteryTasksSupportedontheSAS5/iRandSAS6/iRController
Connector Tasks
Table A-30.ConnectorTasksSupportedontheSAS5/iRandSAS6/iRControllers
Physical Disk Tasks
Table A-31.PhysicalDiskTasksSupportedontheSAS5/iRandSAS6/iRControllers
Virtual Disk Tasks
Table A-32. Virtual Disk Tasks Supported by the SAS 5/iR and SAS 6/iR Controllers
Import Foreign Configuration
No
No
Import/Recover Foreign Configuration
No
No
Set Patrol Read Mode
No
No
Start Patrol Read
No
No
Stop Patrol Read
No
No
Battery Task Name
SAS 5/iR
SAS 6/iR
Recondition Battery
No
No
Start Learn Cycle
No
No
Delay Learn Cycle
No
No
Connector Task Name
SAS 5/IR
SAS 6/iR
Connector Rescan
No
No
Physical Disk Task Name
SAS 5/IR
SAS 6/iR
Blink/Unblink
Yes
Task only available when an enclosure or backplane and LEDs on the physical
disks are present.
Yes
Assign and Unassign Global Hot
Spare
No
Supports up to two global hot spares
Prepare to Remove
No
No
Offline
No
No
Online
No
No
Initialize
No
No
Rebuild
No
NA.
Rebuild automatically initiated by the
controller.
Cancel Rebuild
No
No
Remove Dead Disk Segments
No
No
Format Disk
No
No
Clear
No
No
Cancel Clear
No
No
Virtual Disk Task Name
SAS 5/IR
SAS 6/iR
Assign and Unassign Dedicated Hot Spare
No
No