Users Guide

ManualsBrandsDell ManualsNAS & storage serversOpenManage Server Administrator Version 6.1

131

132

133

134

135

136

137

138

139

140



Use this window to view information about the enclosure's fans.



The fans are a component of the enclosure's cooling module. The following table describes the fan properties.



Power Supply Properties



Use this window to view information about the enclosure's power supplies.



Property

Definition

Status

These icons represent the severity or health of the storage component.



Normal/OK



Warning/Non-critical



Critical/Fatal

See "Storage Component Severity" for more information.

Name

This property displays the name of the fan.

State

This property displays the current status of the fan.

Ready — The fan is functioning normally.

Degraded — The fan has encountered a failure and is operating in a degraded state.

Offline — The fan or power supply has been removed from the enclosure.

Failed — The fan has encountered a failure and is no longer functioning. Storage Management may also be unable to communicate with the

enclosure using SES commands. The Failed state is displayed when the enclosure does not respond to a status query from Storage

Management for any reason. For example, disconnecting the cable would cause this state to be displayed.

Missing — The fan is not present in the enclosure.

Part

Number

This property displays the part number of the fan.

ThispropertyisnotdisplayedforthePowerVault™22xSenclosuresthathaveE.17firmwareorlater.

Speed

This property indicates the fan speed. Possible values are Fast, Medium, Slow, and Stopped. If the fan is in Offline state, the value for the

Speed property is Unknown.

For information on events that cause the fan speed to change, refer to the hardware documentation.