Users Guide


Controller Information

For information on the controller, see the following topics:
l "Controllers"
l "Controller Properties and Tasks"

Controller Components

For information on attached components, see the following topics:
l "RAID Controller Batteries"
l "Firmware/Driver Versions"
l "Connectors"

l "Virtual Disks"

Controller Properties and Tasks

Use this window to view information about the controller and execute controller tasks.

Controller Properties

The controller properties can vary depending on the model of the controller. Controller properties may include:


Critical/Failure/Error. The component has either failed or failure is imminent. The component requires immediate attention and may need to be
replaced. Data loss may have occurred.
NOTE: If you have connected the enclosure in Redundant path mode, the connectors are represented as Logical Connector.
Property
Definition
Status
These icons represent the severity or health of the storage component.



Normal/OK


Warning/Non-critical


Critical/Fatal
See "Storage Component Severity" for more information.
ID
This property displays the controller ID assigned to the controller by Storage Management. Storage Management numbers the
controllers attached to the system starting with zero. This number is the same as the controller ID number reported by the
"omreport Command."
Name
This property displays the name of the controller.
State
This property displays the current status of the controller. Possible values are:
Ready — The controller is functioning normally.
Degraded — The controller has encountered a failure and is operating in a degraded state.
Failed — The controller has encountered a failure and is no longer functioning.