User's Manual

ManualsBrandsDell ManualsSoftwareDell OpenManage Server Administrator Version 6.1.1
omconfig Enable Enclosure Alarm  
 
Does my enclosure support this feature? See "Supported Features."  
Use the following omconfig command syntax to enable the enclosure alarm:  
 
Complete Syntax  
omconfig storage enclosure action=enablealarm controller=id enclosure=<ENCLOSUREID>  
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure. See "enclosure=<ENCLOSUREID> Parameter" for more information.  
 
Example for SCSI, SATA, and ATA Controllers:  
For example, to enable the alarm on the enclosure attached to connector 2 on controller 1, you would enter:  
omconfig storage enclosure action=enablealarm controller=1 enclosure=2  
See "enclosure=<ENCLOSUREID> Parameter on SCSI, SATA, and ATA Controllers" for more information on enclosure specification. See "RAID Controller 
Technology: SCSI, SATA, ATA, and SAS" to identify which technology a controller uses.  
 
Example for SAS Controllers:  
For example, to enable the alarm on enclosure 3 attached to connector 0 on controller 1, you would enter:  
omconfig storage enclosure action=enablealarm controller=1 enclosure=0:3  
See "enclosure=<ENCLOSUREID> Parameter on SAS Controllers" for more information on enclosure specification. See "RAID Controller Technology: SCSI, SATA, 
ATA, and SAS" to identify which technology a controller uses.  
 
omconfig Disable Enclosure Alarm  
 
Does my enclosure support this feature? See "Supported Features."  
Use the following omconfig command syntax to disable the enclosure alarm.  
 
Complete Syntax  
omconfig storage enclosure action=disablealarm controller=id enclosure=<ENCLOSUREID>  
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure. See "enclosure=<ENCLOSUREID> Parameter" for more information.  
 
Example for SCSI, SATA, and ATA Controllers:  
For example, to disable the alarm on the enclosure attached to connector 2 on controller 1, you would enter:  
omconfig storage enclosure action=disablealarm controller=1 enclosure=2  
See "enclosure=<ENCLOSUREID> Parameter on SCSI, SATA, and ATA Controllers" for more information on enclosure specification. See "RAID Controller 
Technology: SCSI, SATA, ATA, and SAS" to identify which technology a controller uses.  
 
Example for SAS Controllers:  
For example, to disable the alarm on enclosure 3 attached to connector 0 on controller 1, you would enter:  
omconfig storage enclosure action=disablealarm controller=1 enclosure=0:3  
See "enclosure=<ENCLOSUREID> Parameter on SAS Controllers" for more information on enclosure specification. See "RAID Controller Technology: SCSI, SATA, 
ATA, and SAS" to identify which technology a controller uses.  
 
omconfig Set Enclosure Asset Tag  