User's Manual

66 Working with Remote Access Controller
5 Configure the following optional VLAN configuration details:
NOTE: VLAN configuration is not applicable for systems with iDRAC.
• Enable VLAN ID
• VLAN ID
• Priority
6 Configure the following IPv4 Properties:
• IP Address Source
• IP Address
• Subnet Mask
• Gateway Address
7 Configure the following IPv6 Properties:
• IP Address Source
• IP Address
• Prefix Length
• Default Gateway
• DNS Address Source
• Preferred DNS Server
• Alternate DNS Server
NOTE: You will be able to configure the IPv4 and IPv6 address details only if
you enable the IPv4 and IPv6 properties under Additional Configuration.
8 Click Apply Changes.
book.book Page 66 Thursday, February 5, 2009 2:45 PM