User's Manual

58 Server Administrator Services
Properties
Subtab: Temperature Probes
Under the Properties tab, you can view the current readings and status for
your system's temperature probes and configure minimum and maximum
values for temperature probe warning threshold.
NOTE: Some temperature probe fields differ according to the type of firmware your
system has: BMC or ESM. Some threshold values are not editable on BMC-based
systems. When assigning probe threshold values, Server Administrator sometimes
rounds the minimum or maximum values you enter to the closest assignable value.
NOTE: Users can set minimum and maximum temperature probe threshold values for
an external chassis to whole numbers only. If users attempt to set either the minimum
or maximum temperature probe threshold value to a number that contains a decimal,
only the whole number before the decimal place is saved as the threshold setting.
Voltages
Click the Voltages object to manage voltage levels in your system. Server
Administrator monitors voltages across critical components in various chassis
locations in the monitored system. The Voltages object action window can
have the Properties tabs depending on the user's group privileges.
Properties
Subtab: Voltage Probes
Under the Properties tab, you can view the current readings and status for
your system's voltage probes and configure minimum and maximum values
for voltage probe warning threshold.
NOTE: Some voltage probe fields differ according to the type of firmware your
system has: BMC or ESM. Some threshold values are not editable on
BMC-based systems.
book.book Page 58 Thursday, February 5, 2009 2:45 PM