User's Manual

Server Administrator Services 55
Properties
Subtab: Elements
Under the Properties tab, you can:
• View information about your power supply redundancy attributes.
• Check the status of individual power supply elements, including the Rated
Input Wattage and Maximum Output Wattage. The Rated Input Wattage
attribute will be displayed only on PMBus systems starting xx1x.
Processors
Click the Processors object to manage your system's microprocessor(s).
A processor is the primary computational chip inside a system that controls
the interpretation and execution of arithmetic and logic functions. The
Processors object action window can have the Properties tabs depending on
the user's group privileges.
Properties
Subtab: Information
Under the Properties tab, you can view information about your system's
microprocessor(s) and access detailed capabilities and cache information.
Remote Access
Click the Remote Access object to manage the Baseboard Management
Controller (BMC) or Integrated Dell Remote Access Controller (iDRAC)
features and Remote Access Controller features.
Selecting Remote Access tab allows you to manage the BMC/iDRAC features
such as, general information on the BMC/iDRAC. You can also manage the
configuration of the BMC/iDRAC on a local area network (LAN), serial port
for the BMC/iDRAC, terminal mode settings for the serial port, BMC/iDRAC
on a serial over LAN connection, and BMC/iDRAC users.
NOTE: BMC is supported in Dell PowerEdge x8xx and x9xx systems and iDRAC is
supported in Dell xx0x and xx1x systems only.
NOTE: If an application other than Server Administrator is used to configure the
BMC/iDRAC while Server Administrator is running, the BMC/iDRAC configuration
data displayed by Server Administrator may become asynchronous with the
BMC/iDRAC. It is recommended that Server Administrator be used to configure the
BMC/iDRAC while Server Administrator is running.
book.book Page 55 Thursday, February 5, 2009 2:45 PM