Quick Reference Guide

220 Index
The controller battery Learn
cycle has started., 133
The controller battery Learn
cycle has timed out., 134
The controller battery Learn
cycle will start in %
days., 135
The controller battery needs to
be replaced., 130
The controller battery
temperature is above
normal, 131
The controller battery
temperature is above
normal., 144
The controller battery
temperature is normal., 131
The controller cache has been
discarded., 136
The controller debug log file has
been exported., 151
The controller has recovered
cached data from the
BBU., 187
The controller is unable to
recover cached data from the
battery backup unit
(BBU)., 186
The controller reconstruct rate
has changed., 158
The controller write policy has
been changed to Write
Back., 137
The controller write policy has
been changed to Write
Through., 137
The current kernel version and
the non-RAID SCSI driver
version are older than the
minimum required levels.See
the Readme file for a list of
validated kernel and driver
versions., 129
The DC power supply is
switched off., 179
The dedicated hot spare is too
small., 161
The EMM has failed., 167
The enclosure cannot support
both SAS and SATA physical
disks. Physical disks may be
disabled., 171
The enclosure has a hardware
error., 170
The enclosure is not
responding., 171
The enclosure is unstable., 170
The enclosure temperature has
returned to normal., 192
The factory default settings have
been restored., 187
The firmware on the EMMs is
not the same version. EMM0
%1 EMM1 %2, 175
The global hot spare is too
small., 161