Quick Reference Guide

182 Storage Management Message Reference
2329 SAS port
report: %1
Warning /
Non-critical
Cause: The text for this
alert is generated by the
controller and can vary
depending on the
situation. The %1 indicates
a substitution variable.
The text for this
substitution variable is
generated by the controller
and is displayed with the
alert in the Alert Log.
This text can vary
depending on the
situation.
Action: Run the PHY
integrity test diagnostic.
Make sure the cables are
attached securely. If the
problem persists, replace
the cable with a valid cable
according to SAS
specifications. If the
problem still persists,
you may need to replace
some devices such as the
controller or EMM. See the
hardware documentation
for more information.
Clear Alert
Number:
None.
Related Alert
Number:
None.
Table 4-4. Storage Management Messages (continued)
Event ID Description Severity Cause and Action Related Alert
Information