Owner's Manual

file:///T|/htdocs/SOFTWARE/svradmin/6.0.3/readme/readme.txt[10/23/2012 1:29:23 PM]
instructions on applying this HotFix:
- (Windows 2000 Server) "http://support.microsoft.com?kbid=818060"
- (Windows 2003 Server) "http://support.microsoft.com/kb/839571"
As explained in the Microsoft KB article, use the Registry
Editor ("regedit.exe") to browse to the following key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion
\Internet Settings\
If "DialupUseLanSettings" key is not present, create a registry
item for "DialupUseLanSettings" and set a value of "1". Make sure
the value type is "DWORD".
Note: HotFix Q818060 may still fail to install on Internet Explorer
6.0 SP1. If the error "This update requires Internet Explorer 6.0
SP1 to be installed" occurs, follow these steps:
1. Unzip "Q818060-Eng-IE6.zip".
2. From a Windows command shell, enter "Q818060.exe /C" to
extract the HotFix files to a directory.
3. In the command shell, switch to the directory and then enter
"ieupdate.exe Q818060".
4. Launch Internet Explorer, open the "Help" menu, and select
"About Internet Explorer". Verify that "Q818060" appears in
the "Update Versions" field.
######################################################################
KNOWN ISSUES
######################################################################
This section provides information on open issues with this release of
Server Administrator.
======================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON ALL SUPPORTED OPERATING
SYSTEMS
======================================================================
* On PowerEdge 1950, 2950 and PowerVault NX 1950 systems with internal
USB, BIOS setting configuration for Internal USB Port is possible
only if UA (User Accessible or external) USB ports are set to
"All Ports On". If UA USB ports are not set to "All Ports On" and
user tries to configure BIOS setting for Internal USB Port using
Server Administrator GUI, the configuration will appear to be
successful but the changes will not take effect on next reboot. If
UA USB ports settings are changed from "All Ports On" to "All Ports
Off" or "Only Back Ports On", it will automatically set the Internal
USB Port to Off on next reboot.