User's Manual


Enclosure Support

Table A-18. Enclosure Support on the SAS 5/iR and SAS 6/iR Controllers

Supported Features on the Non-RAID Controllers

This section identifies the controller-supported features and whether or not an enclosure can be attached to the controller.
l "Controller Tasks"
l "Battery Tasks"
l "Connector Tasks"
l "Physical Disk Tasks"
l "Virtual Disk Tasks"
l "Enclosure Support"

For enclosure-supported tasks, see "Enclosure and Backplane Features."

Controller Tasks

Table A-19. Controller Tasks Supported on the Non-RAIDSASControllers

Battery Tasks

Disk Cache Policy
No
No
Cache I/O
No
No
Direct I/O
No
No
Enclosure Support
SAS 5/IR
SAS 6/iR
Can an enclosure be attached to this controller?
No
No
Controller Task Name
Non-RAID SAS
Enable Alarm
No
Disable Alarm
No
Quiet Alarm
No
Test Alarm
No
Reset configuration
No
Set Rebuild Rate
No
Set Background Initialization Rate
No
Set Check Consistency Rate
No
Set Reconstruct Rate
No
Rescan Controller
No
Create Virtual Disk
No
Export Log File
No
Clear Foreign Configuration
No
Import Foreign Configuration
No
Import/Recover Foreign Configuration
No
Set Patrol Read Mode
No
Start Patrol Read
No
Stop Patrol Read
No