User's Manual


2200

Description: Replace member operation is not possible as combination of SAS and SATA physical disks is not supported in the same virtual
disk.

Cause: This alert is provided for informational purposes. Replace member operation cannot be performed because the target physical disk is of a different type
(SAS/SATA) from the rest of the virtual disk. SAS and SATA are not supported on the same virtual disk.

Action: None.

Severity: Warning/Noncritical. See "Alert Severity Levels" for more information.

Clear Alert Number: None.

Related Alert Number: None.

2201

Description: A global hot spare failed.

Cause: The controller is not able to communicate with a disk that is assigned as a global hot spare. The disk may have failed or been removed. There may also
be a bad or loose cable.

Action: Verify that the disk is healthy and that it has not been removed. Check the cables. See "Cables Attached Correctly" for more information on checking
the cables. If necessary, replace the disk and reassign the global hot spare.

Severity: Warning/Noncritical. See "Alert Severity Levels" for more information.

Clear Alert Number: None.

Related Alert Number: 2048

2202

Description: A global hot spare has been removed.

Cause: The controller is not able to communicate with a disk that is assigned as a global hot spare. The disk may have been removed. There may also be a
bad or loose cable.

Action: Verify that the disk is healthy and that it has not been removed. Check the cables. See "Cables Attached Correctly" for more information on checking
the cables. If necessary, replace the disk and reassign the global hot spare.

Severity: OK/Normal/Informational. See "Alert Severity Levels" for more information.
