Users Guide


omconfig Enable Enclosure Alarm

Does my enclosure support this feature? See "Supported Features."

Use the following omconfig command syntax to enable the enclosure alarm:

Complete Syntax

omconfig storage enclosure action=enablealarm controller=id enclosure=<ENCLOSUREID>

where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure. See "enclosure=<ENCLOSUREID> Parameter" for more information.

Example for SCSI, SATA, and ATA Controllers:

For example, to enable the alarm on the enclosure attached to connector 2 on controller 1, you would enter:

omconfig storage enclosure action=enablealarm controller=1 enclosure=2

See "enclosure=<ENCLOSUREID> Parameter on SCSI, SATA, and ATA Controllers" for more information on enclosure specification. See "RAID Controller
Technology: SCSI, SATA, ATA, and SAS" to identify which technology a controller uses.

Example for SAS Controllers:

For example, to enable the alarm on enclosure 3 attached to connector 0 on controller 1, you would enter:

omconfig storage enclosure action=enablealarm controller=1 enclosure=0:3

See "enclosure=<ENCLOSUREID> Parameter on SAS Controllers" for more information on enclosure specification. See "RAID Controller Technology: SCSI, SATA,
ATA, and SAS" to identify which technology a controller uses.

omconfig Disable Enclosure Alarm

Does my enclosure support this feature? See "Supported Features."

action=setassetname controller=id enclosure=<ENCLOSUREID>
assetname=<string>
"omconfig Set Enclosure Asset Name"
action=settempprobes controller=id enclosure=<ENCLOSUREID> index=id
minwarn=n maxwarn=n
"omconfig Set Temperature Probe
Thresholds"
action=resettempprobes controller=id enclosure=<ENCLOSUREID> index=id
"omconfig Reset Temperature Probe
Thresholds"
action=setalltempprobes controller=id enclosure=<ENCLOSUREID> minwarn=n
maxwarn=n
"omconfig Set All Temperature Probe
Thresholds"
action=resetalltempprobes controller=id enclosure=<ENCLOSUREID>
"omconfig Reset All Temperature Probe
Thresholds"
action=blink controller=id enclosure=<ENCLOSUREID>
"omconfig Blink"