Users Guide
Use the following omconfig command syntax to cancel the initialization of a virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelinitialize controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these values, you would enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to cancel the initialization of virtual disk 4 on controller 1, you would enter:
omconfig storage vdisk action=cancelinitialize controller=1 vdisk=4
omconfig Cancel Background Initialize
Does my controller support this feature? See "Supported Features."
Use the following omconfig command syntax to cancel the background initialization process on a virtual disk. See "Cancel Background Initialization" and
"Background Initialization on PERC 3/SC, 3/DC, 3/QC, 4/SC, 4/DC, 4e/DC, 4/Di, 4e/Si, and 4e/Di Controllers" for more information.
Complete Syntax
omconfig storage vdisk action=cancelbginitialize controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these values, you would enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to cancel background initialization on virtual disk 4 on controller 1, you would enter:
omconfig storage vdisk action=cancelbginitialize controller=1 vdisk=4
omconfig Restore Dead Segments
Does my controller support this feature? See "Supported Features."
Use the following omconfig command syntax to recover data from a RAID-5 virtual disk that has been corrupted. This task attempts to reconstruct data from a
corrupt portion of a physical disk included in a RAID-5 virtual disk. See "Restore Dead Segments" for more information.
Complete Syntax