Users Guide
omconfig Virtual Disk Commands
The following sections provide the omconfig command syntax required to execute virtual disk tasks.
Table 15-16.omconfigManageVirtualDiskCommands
omconfig Blink Virtual Disk
Does my controller support this feature? See "Supported Features."
Use the following omconfig command syntax to blink the physical disks included in a virtual disk.
Complete Syntax
omconfig storage vdisk action=blink controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these values, you would enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
CAUTION: The omconfig storage vdisk action=deletevdisk controller=id vdisk=id command deletes a virtual disk. Deleting a virtual disk destroys
all information including file systems and volumes residing on the virtual disk.
Required Command
Levels (1, 2, 3)
Optional name=value Pairs
Documentation Section
omconfig storage
vdisk
action=checkconsistency controller=id vdisk=id
"omconfig Check Consistency"
action=cancelcheckconsistency controller=id vdisk=id
"omconfig Cancel Check Consistency"
action=pausecheckconsistency controller=id vdisk=id
"omconfig Pause Check Consistency"
action=resumecheckconsistency controller=id vdisk=id
"omconfig Resume Check Consistency"
action=blink controller=id vdisk=id
"omconfig Blink Virtual Disk"
action=unblink controller=id vdisk=id
"omconfig Unblink Virtual Disk"
action=initialize controller=id vdisk=id
"omconfig Initialize Virtual Disk"
action=fastinit controller=id vdisk=id
"omconfig Fast Initialize Virtual Disk"
action=slowinit controller=id vdisk=id
"omconfig Slow Initialize Virtual Disk"
action=cancelinitialize controller=id vdisk=id
"omconfig Cancel Initialize Virtual Disk"
action=cancelbginitialize controller=id vdisk=id
"omconfig Cancel Background Initialize"
action=restoresegments controller=id vdisk=id
"omconfig Restore Dead Segments"
action=splitmirror controller=id vdisk=id
"omconfig Split Mirror"
action=unmirror controller=id vdisk=id
"omconfig Unmirror"
action=assigndedicatedhotspare controller=id vdisk=id pdisk=<PDISKID>
assign=<yes|no>
"omconfig Assign Dedicated Hot Spare" and
"omconfig Unassign Dedicated Hot Spare"
action=deletevdisk controller=id vdisk=id [force=yes]
"omconfig Delete Virtual Disk"
action=format controller=id vdisk=id
"omconfig Format Virtual Disk"
action=reconfigure controller=id vdisk=id raid=<c| r0| r1| r5| r6 | r10> size=<size>
pdisk=<PDISKID>
"omconfig Reconfiguring Virtual Disks"
action=changepolicy controller=id vdisk=id [readpolicy=<ra | nra | ara | rc | nrc> |
writepolicy=<wb | wt | wc | nwc | fwb> | cachepolicy=<d | c>] diskcachepolicy=<e|d>
"omconfig Change Virtual Disk Policy"
action=rename controller=id vdisk=id name=<string>
"omconfig Rename Virtual Disk"