Users Guide

You can also locate this task from the Change Controller Properties drop down menu. For more information, see "Change Controller Properties."

Set Check Consistency Rate

Does my controller support this feature? See "Supported Features."

The Set Check Consistency Rate task changes the amount of system resources dedicated to the check consistency task. See "Check Consistency" for more
information about the check consistency task.

The check consistency rate, configurable between 0% and 100%, represents the percentage of the system resources dedicated to running the check
consistency task. At 0%, the check consistency will have the lowest priority for the controller, will take the most time to complete, and will be the setting with
the least impact to system performance. A check consistency rate of 0% does not mean that the check consistency is stopped or paused.

At 100%, the check consistency will be the highest priority for the controller, will minimize the check consistency time, and will be the setting with the most
impact to system performance.

To change the controller's check consistency rate:
1. Type a numerical value in the New Check Consistency Rate text box. The value must be within the 0 – 100 range.
2. Click Apply Changes. If you want to exit and cancel your changes, click Go Back to Previous Page.

To locate this task in Storage Management:
1. Expand the Storage tree object to display the controller objects.
2. Select a controller object.
3. Select the Information/Configuration subtab.
4. Select Set Check Consistency Rate from the Available Tasks drop-down menu.
5. Click Execute.

You can also locate this task from the Change Controller Properties drop down menu. For more information, see "Change Controller Properties."

Related Information:
l "Check Consistency"
l "Cancel Check Consistency"

Set Reconstruct Rate

Does my controller support this feature? See "Supported Features."

The Set Reconstruct Rate task changes the amount of system resources dedicated to the reconstruct task.

The reconstruct task remakes the virtual disk after you have changed the RAID level or otherwise reconfigured the virtual disk. The reconstruct rate,
configurable between 0% and 100%, represents the percentage of the system resources dedicated to running the reconstruct task. At 0%, the reconstruct
will have the lowest priority for the controller, will take the most time to complete, and will be the setting with the least impact to system performance. A
reconstruct rate of 0% does not mean that the reconstruct is stopped or paused.

At 100%, the reconstruct will be the highest priority for the controller, will minimize the reconstruct time, and will be the setting with the most impact to system