User's Manual

96 omconfig: Managing Components Using the Instrumentation Service
NOTE: Reboot your system for the power profiles setup options to take effect.
omconfig chassis pwrmonitoring/omconfig mainsystem pwrmonitoring
Use the omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring command to configure power consumption information.
NOTE: This command is applicable to select Dell xx0x systems that support PMBus
only.
Default Warning Thresholds
NOTE: Sensor managing capabilities vary across systems.
If you want to set both the upper and lower power consumption probe
warning threshold values to the recommended default value, type:
fanmode=min | max min: Sets the mode to minimum power
utilization.
max: Sets the mode to maximum
performance.
Table 4-11. omconfig chassis pwrmonitoring/omconfig mainsystem pwrmonitoring
name=value pair 1 name=value pair 2 Description
index=<n> NA Number of the probe or probe index
(must be specified).
config=probe warnthresh=settodefault Sets minimum and maximum warning
thresholds values to default.
warnthresh=<n> Sets a value for the warning threshold.
unit=watt | btuphr | watt: Displays the unit in Watts.
btuphr: Displays the unit in BTU/hr
config=resetreading type=energy | peakpower energy: Resets the system energy reading.
peakpower: Resets the system peak power.
Table 4-10. omconfig chassis pwrmanagement/omconfig mainsystem
pwrmanagement (continued)
name=value pair 1 name=value pair 2 Description