User's Manual
omconfig: Managing Components Using the Instrumentation Service 95
unit=watt | btuphr |
percent
watt: Displays the unit in Watts.
btuphr: Displays the unit in BTU/hr
percent: Displays the unit in percentage.
config=profile profile=
maxperformance| apc |
osctrl | custom
maxperformance: Sets the processor to
the highest supported processor state. It
offers maximum performance mode with
minimal power economy.
apc: Active Power Control (apc) enables
the demand-based power management
controlled by BIOS.
osctrl: OS Control (osctrl) enables the
demand-based power management
controlled by the operating system.
custom: This profile allows you to
configure individual BIOS settings. It
offers added control by displaying the
underlying BIOS settings.
cpupowermode=min |
max | systemdbpm |
osdbpm
min: Sets the CPU power consumption to
minimum.
max: Sets the CPU power consumption to
maximum.
systemdbpm: Sets the mode to system
demand based power management.
osdbpm: Sets the mode to operating
system demand based power
management.
NOTE: These options are applicable
only when custom profile is selected.
memorypowermode=min
| 800 | 1067 | 1333 | max
min: Set the mode to minimum power
utilization.
800 | 1067 | 1333: Set the mode to 800,
1067, or 1333 MHz.
max: Sets the mode to maximum
performance.
Table 4-10. omconfig chassis pwrmanagement/omconfig mainsystem
pwrmanagement
(continued)
name=value pair 1 name=value pair 2 Description